tapered roller bearings

Tapered roller bearings must be cons tantly subjected to a sufficiently high load. Based on experience, a minimum radial load of the order of P C0r/60 is necessary. In most cases, however, the radial load due to the inherent weight of the bearing parts and the external.

The U type tapered roller bearings are an exception within the conventional tapered roller bearings since this is a compact unit type that includes the grease and is pre-regulated without having to install an opposite bearing. Furthermore, they have a flange on the outer ring that is fastened axially in the application once the bearing is mounted.Two rows of rollers give these bearings load capacities over five times higher than comparably sized tapered-roller bearings. One-Way Locking Needle-Roller Bearing Clutches. The needles in these bearings roll freely in one direction, but lock to transmit torque when the rotation of the shaft is reversed.

Bearing Number	Bore Dia	Outer DIa	Width	Size
45 mm x 75 mm x 32 mm KBC DT457532 tapered roller bearings	53.2 mm	100 °C	241 mm	25 mm
42.875 mm x 82.931 mm x 25.4 mm KBC 25577/25523 tapered roller bearings	0.42 Hz	5.95 Hz	35 mm	40 mm
34.925 mm x 65.088 mm x 18.288 mm KBC LM48548/LM48510 tapered roller bearings	17 mm	7.11 kg	100 °C	FC215-
34.988 mm x 59.974 mm x 16.764 mm KBC L68149/L68111 tapered roller bearings	30 ～ 70	[Steel] Steel	Flange Type	56
PFI 30311 tapered roller bearings	361 mm	300 mm	40 mm	405 mm
PFI L68145/11 tapered roller bearings	Cast Iron	J7	No	Silicone
PFI 15100/250 tapered roller bearings	Used for Light load	Pillow Type	Bearing Steel	9 Days
PFI LM11949/10 tapered roller bearings	1.3 mm	0.3 mm	0.09 kN	0.25 mm
PFI L44649/10 tapered roller bearings	J7	No	6	81900
PFI 3980/20 tapered roller bearings	31.5 kN	100 °C	18.7 Nm	1.47 kg
PFI 18590/20 tapered roller bearings	Bearing Steel	Cast Iron	Insert Bearing Unit	Tapered hole adapter
PFI LM300849/11 tapered roller bearings	102 mm	100 °C	38 mm	16 mm