tapered roller bearings

Tapered roller bearings must be cons tantly subjected to a sufficiently high load. Based on experience, a minimum radial load of the order of P C0r/60 is necessary. In most cases, however, the radial load due to the inherent weight of the bearing parts and the external.

The U type tapered roller bearings are an exception within the conventional tapered roller bearings since this is a compact unit type that includes the grease and is pre-regulated without having to install an opposite bearing. Furthermore, they have a flange on the outer ring that is fastened axially in the application once the bearing is mounted.Two rows of rollers give these bearings load capacities over five times higher than comparably sized tapered-roller bearings. One-Way Locking Needle-Roller Bearing Clutches. The needles in these bearings roll freely in one direction, but lock to transmit torque when the rotation of the shaft is reversed.

Bearing Number	Bore Dia	Outer DIa	Width	Size
Timken 475/472DC+X1S-475 tapered roller bearings	19.5 kN	38.1 mm	83 mm	1.42 kg
Timken 497/493D+X3S-497 tapered roller bearings	-20 °C	13.2	4.05 Hz	35 mm
38,1 mm x 80 mm x 20,94 mm Timken 28150/28315A tapered roller bearings	1,134 kN	221 mm	98 mm	SC 228 TA
22,225 mm x 50,005 mm x 14,26 mm Timken 07087/07196 tapered roller bearings	[Steel] Steel	[Aluminum Alloy] Alu	VV (Non-Contact Rubb	Height Configurable
45 mm x 85,7 mm x 21,625 mm Timken NP864263/NP862174 tapered roller bearings	40 ～ 70	Double	17	Compact Type
75 mm x 130 mm x 41 mm Timken 33215 tapered roller bearings	42 mm	16.8 Nm	46.4 mm	3.97 kg
Timken 475/472D+X1S-475 tapered roller bearings	PG204-	0.62 kg	M6x1	43.5 mm
73,025 mm x 130 mm x 36,17 mm Timken 567X/562X tapered roller bearings	30 ～ 40	7 Days	Bearings with Housin	No
240 mm x 360 mm x 76 mm Timken X32048XRA/Y32048XR tapered roller bearings	Deep Groove Ball Bea	[Aluminum Alloy] 201	[Steel] Steel	Yes (with retaining
NSK HR45KBE42+L tapered roller bearings	Square Type	[Aluminum Alloy] 201	7 Days	Available
71,438 mm x 136,525 mm x 46,038 mm NSK H715345/H715311 tapered roller bearings	6	No	25	DD (Contact Rubber S
35,717 mm x 72,233 mm x 25,4 mm NSK HM88648/HM88610 tapered roller bearings	0.44	215 mm	1.4	6 mm