- AMERICAN NTN BEARING LTD
- angular contact ball bearings bearing units complex bearings
English
Home>Products>cylindrical roller bearings>40 mm x 80 mm x 30,2 mm ISO NU3208 cylindrical roller bearings
40 mm x 80 mm x 30,2 mm ISO NU3208 cylindrical roller bearings
category
cylindrical roller bearings
ISO NU3208 Bearing SPECIFICATIONS
The online 5-3/8 in B 40 mm x 80 mm x 30,2 mm ISO NU3208 cylindrical roller bearings parts store gives AMERICAN NTN BEARING LTD you immediate access to a selection of more than 40 mm x 80 mm x 30,2 mm 1.4 million new, used, remanufactured.
- ISO
NU3208
- Solid Pillow Block
- Maximum of +130
- 5-3/8 in
- 4-9/16 in
- UL, AFBMA, AGMA, ASM
- Two-Bolt Base
- 2-11/16 in
- 9-1/4 in
-
AMERICAN NTN BEARING LTD2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Customers who bought this item also bought 40 mm x 80 mm x 30,2 mm ISO NU3208 cylindrical roller bearings
- Solid Pillow Block
- Maximum of +130
- 5-3/8 in
- 4-9/16 in
- UL, AFBMA, AGMA, ASM
- Two-Bolt Base
- 2-11/16 in
- 9-1/4 in
- Babbitt
- Cannot Be Relubricat
- 40 mm x 80 mm x 30,2 mm
ISO NU3208 Systems 40 mm x 80 mm x 30,2 mm ISO NU3208 cylindrical roller bearings
ISO NU3208 bearing Size Chart (mm/inches) | |
|---|---|
| da | 136.525 mm |
| Da | 269.999 mm |
| Ca | 105.816 mm |
| A1 | 158.75 mm |
| A2 | 279.4 mm |
| S | 4.763 mm |
| ba | 77.787 mm |
| H | 317.5 mm |
| H1 | 160.35 mm |
| H2 | 63.5 mm |
| J min. | 431.8 mm |
| J max. | 463.55 mm |
| J1 | 95.25 mm |
| L | 539.75 mm |
| N1 | 28.575 mm |
| R1 | 95.25 mm |
| R2 | 39.688 mm |
| RG | 3/8 NPT |
| PG | 1/4 NPT |
| h | 50.8 mm |
| Housing | SAW 530 |
| Adapter sleeve assembly | SNW 130x5.3/8 |
| Stabilizing ring | SR-30-0 |
| Taconite seal | TER 128 |
| End plug (suffix Y) | EPR 16 |
| Max. speed for Taconite seal | 575 r/min |
| P60° | 230 kN |
| P90° | 138 kN |
| P120° | 87.2 kN |
| P150° | 80.1 kN |
| P180° | 96.1 kN |
| Pa | 43.2 kN |
| Mass pillow block | 92.5 kg |
| Cap bolt | 4 x 3/4-10 UNC |
| Cap bolt recommended tightening torque | 359.3 N·m |
| Cap bolt, SAE grade | 5 |
| Eye bolt | 2 x 3/8-16 UNC |
| Appropriate attachment bolt size G | 1 in |
| Initial grease fill | 623.7 g |
ISO NU3208 INTERCHANGE
cylindrical roller bearings Part series NU3208 is a potential replacement for these common bearing part numbers:
NU3208
NU3208
NU3208
NU3208
NU3208
NU3208
NU3208
NU3208
Contact Us
- AMERICAN NTN BEARING LTD
- Address15 Holmes Road, Elgin, lL 64123, U.S.A.
- Phone(Working Time)+1-858-895-4545
- Fax
ISO NU3208 Technical Articles
| Does WD 40 make bearings faster? |
| How freely should a new wheel bearing spin? |
| How should a bearing be supported when pressing it from a shaft? |
cylindrical roller bearings CATEGORIES
- angular contact ball bearings
- bearing units
- complex bearings
- cylindrical roller bearings
- deep groove ball bearings
- linear bearings
- needle roller bearings
- plain bearings
- self aligning ball bearings
- spherical roller bearings
- tapered roller bearings
- thrust ball bearings
- thrust roller bearings
- wheel bearings
- Koyo M802048 Bearing
- Ucp205 NTN Bearing
- NTN P210 Bearing
- Timken 368a Bearing
Customers Who Viewed ISO NU3208 Bearing Also Viewed
45 mm x 85 mm x 19 mm Fersa NUP209FM cylindrical roller bearings
38 mm x 90 mm x 22 mm Fersa F19014 cylindrical roller bearings
50 mm x 100 mm x 25 mm Fersa F19046 cylindrical roller bearings
60 mm x 110 mm x 22 mm SIGMA NJ 212 cylindrical roller bearings
80 mm x 170 mm x 58 mm SIGMA N 2316 cylindrical roller bearings