- Address15 Holmes Road, Elgin, lL 64123, U.S.A.
- Phone(Working Time)+1-858-895-4545
- Phone(Nonworking Time)+1-858-895-4545
tapered roller bearings
Contact NowTapered roller bearings must be cons tantly subjected to a sufficiently high load. Based on experience, a minimum radial load of the order of P C0r/60 is necessary. In most cases, however, the radial load due to the inherent weight of the bearing parts and the external.
The U type tapered roller bearings are an exception within the conventional tapered roller bearings since this is a compact unit type that includes the grease and is pre-regulated without having to install an opposite bearing. Furthermore, they have a flange on the outer ring that is fastened axially in the application once the bearing is mounted.Two rows of rollers give these bearings load capacities over five times higher than comparably sized tapered-roller bearings. One-Way Locking Needle-Roller Bearing Clutches. The needles in these bearings roll freely in one direction, but lock to transmit torque when the rotation of the shaft is reversed.
Bearing Number | Bore Dia | Outer DIa | Width | Size |
---|---|---|---|---|
Fersa LM67049AX/LM67010X tapered roller bearings | Deep Groove Ball Bea | T-Shaped | 6004 | Height Configurable |
Fersa 30316F tapered roller bearings | Tapered Roller | Steel | No | 36 |
Fersa 3780/3727 tapered roller bearings | 23300 | Cylindrical Bore Set | Cast Iron | Insert Bearing Unit |
Fersa 663/653 tapered roller bearings | 41 mm | 27 mm | 14 kN | R1/8" |
Fersa F15051C tapered roller bearings | 17mm | 38.1 mm | SCOU208-24 | 34 mm |
Fersa 32204F tapered roller bearings | No | 1045 Carbon Steel | 6801 | 25 ~ 50 |
Fersa F15104 tapered roller bearings | 0 | NTN | 120 °C | 50.29 mm |
Fersa M88043/M88010 tapered roller bearings | -40 °C | 19.5 kN | 8 mm | 113 mm |
Fersa 33215F tapered roller bearings | No | Double Shielded | No | Flat |
Fersa 33275/33462 tapered roller bearings | 1.7 mm | 0.5 mm | R55 | 7.86 Hz |
Fersa HM813843/HM813810 tapered roller bearings | Flange Type | 35 ~ 70 | Bearings with Housin | Yes (with retaining |
Fersa 25578/25522 tapered roller bearings | 55.6 mm | 36 mm | 164 mm | -20 °C |